The shearing machine is a device that uses one blade to make a reciprocating uniform speed linear motion relative to the other blade to cut wood. It is based on the movement of the upper blade and the fixed rear blade. The scientific and reasonable blade gap is selected to increase the shear stress on various thickness metal materials, so that the sheets are broken and separated according to the required specifications. The shearing machine is a kind of forging equipment, and its main role is in the metal processing industry. Products are widely used in aviation, light industry, metallurgical industry, chemical plants, engineering construction, ships, vehicles, electric power engineering, household appliances, decoration and other fields to provide special machinery and mechanical equipment needed.
After cutting by the shearing machine, it should be able to ensure the verticality and flatness of the shearing surface of the sheared plate, and try to avoid distortion of the plate to obtain high-quality product workpieces. The cloth blade of the shearing machine is fixed on the knife table, and the lower blade is fixed on the work table. During work, there is a support ball on the table, which is beneficial for the plate to not be scratched when it rolls on the wall. The back gauge is used for precise positioning of the plate, and the position is controlled by the motor. The pressing cylinder is used to clamp the plate to prevent the plate from moving when cutting. The guardrail is a safety device to avoid safety accidents. The round trip generally depends on N2, which is faster and less impactful.
The shearing machine is a cutting machine that is widely used in mechanical processing. It can cut steel structural materials of various thicknesses. Common shears are divided into three categories: flat shears, rolling shears and vibration shears. Horizontal shears are in high demand. Shears with a cutting thickness of less than 10mm are mostly driven by gears, and those with a cutting thickness of more than 10mm are hydraulic motorized transmission systems. Generally, it is controlled by a foot or a button to cut metal materials once or continuously.
