1. In order to ensure that the slitting knife is always in a good technical state, it can be put into operation at any time, reduce the downtime of failure, improve the mechanical integrity rate,
Utilization, reduce mechanical wear, extend mechanical life, reduce mechanical operation and maintenance costs to ensure safe production, it is necessary to strengthen the
Maintenance work of mechanical equipment
2. Mechanical maintenance must implement the principle of "paying equal attention to maintenance and prevention first", so as to achieve regular maintenance, mandatory, and correct use and maintenance
The relationship between maintenance and maintenance is not allowed.
3. Each team must do a good job in the maintenance of various types of machinery according to the machinery maintenance procedures and maintenance categories, without unreasonable delay.
The maintenance can be postponed after the approval of the professional engineer, but generally it should not exceed half of the specified maintenance interval
4. To maintain the quality of the machinery, it shall be carried out item by item according to the specified items and requirements, and the maintenance shall not be omitted or not guaranteed. Maintenance items, maintenance quality and maintenance
The problems found should be recorded and reported to the special staff of the department
5. Maintenance personnel and maintenance departments should achieve "three inspections and one handover (self-inspection, mutual inspection, full-time inspection and one-time handover qualified)", and constantly summarize and maintain
Experience to improve maintenance quality
6. The asset management department regularly supervises and inspects the mechanical maintenance of each unit, regularly or irregularly checks the maintenance quality, and rewards the good and punishes the bad.
