There are more and more blades in the market, so how to choose snap on blades? The following are the factors to consider when choosing snap on blades:
Design of blade components: The design of snap on blade components should ensure the safe installation and disassembly of blade components. For example, the blade component should include a positioning component, a limiting component, and an elastic component. The positioning component is fixed to the blade, the limiting component is sliding and set on the blade, and the elastic component is connected to the positioning component and limiting component, so that during installation, the limiting component is mutually clamped with the shaft under the elastic force of the elastic component to install the blade component on the shaft.
The material and shape of the blade: The material and shape of the blade can affect its performance and lifespan. For example, diamond particle size, particle concentration, bond strength, blade thickness, blade length, etc. can all affect the performance and lifespan of the blade. Generally speaking, the impact force of large diamond particles is relatively large, and the larger the size of the front edge collapse, the less likely it is to cause blade blockage, which can effectively reduce the back edge collapse of the product. The impact force of small diamond particles is smaller, and the size of the front edge will be smaller.
The installation method of the blade: The installation method of the snap on blade can also affect its performance and lifespan. For example, the installation of snap on blades should ensure the safe installation and disassembly of blade components, as well as the stability and durability of the blades.
Blade maintenance and upkeep: Proper maintenance and upkeep can extend the lifespan of the blade and maintain its good performance. For example, when replacing the blade, a cross screwdriver should be inserted into the cross screw hole in the crushing groove, and the nut that locks the blade should be rotated counterclockwise with an open wrench to loosen the replacement blade. Then, a screwdriver and wrench should be used to lock it clockwise.
